Technical Alarm Messages at the TM80 Troubleshooting
15 - 14 TM80 Telemetry Monitor Operator’s Manual
Power Low Bat-
tery
Med A The battery charge is low. Replace with new
batteries.
Critically
Low Bat-
tery
High A The battery charge is
almost depleted.
Battery
Mainte-
nance
Required
Med A The lithium-ion battery is
aging.
Battery
Error
Med A The lithium-ion battery
communication error
occurred.
Battery
Type
Error
Med A The battery contacts are
in bad contact.
System Device
Error
High A An error occurred while
performing the selftest
of the main board.
An error occurred while
performing the selftest
of the parameter module
or bluetooth module.
The parameter module
communication error or
initialization error
occurred.
Restart the TM80. If
the problem persists,
contact your service
personnel.
Real
Time
Clock
Error
High A An error occurred while
initializing the real time
clock.
Restor-
ing Last
Defaults
Failed
Low C An error occurred while
restoring the last default
configuration.
Loading
Defaults
Failed
Low C An error occurred while
loading the default con-
figuration.
Measurement
Alarm
message
Default
Alarm
priority
Alarm
Indication
Possible cause Solution
* The asterisk (*) means the alarm priority is configurable.
** XX is the ECG lead name.
To Next Page
Loading...
