NEC DSX Software Manual

Caller ID Logging
DSX Software Manual Features ◆ 73
Features
Operation
Reviewing the Caller ID Log
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To review your Caller ID log:
1.
[Calls XX]
[CLXX]
Select the Caller ID log.
• Your Ring/Message Lamp will wink on (green) when you have Caller ID records
that you have not yet reviewed.
[View All]
[All]
Select to review all your Caller ID records.
• You see the following review options.
• Press Volume Up and Volume Down to scroll through your records.
Review Options
• On a 3-line display telephone, press CHECK to switch between the name (page 1)
and number (page 2) display.
[Callback]
[Call]
Select to call the person back.
[Delete]
[Del]
Select to delete the displayed record.
[Store Bin]
[Stor]
Select to store the number in one of your Personal Speed Dial
bins (following normal Speed Dial programming steps).
[Delete All]
[N/A]
Select to delete all your Caller ID records.
[Exit]
[Exit]
Back up to the beginning without making any changes.
[View Unans]
[Unan]
Select to review Caller ID records for calls that rang your extension and
were unanswered.
• Go to the review options (see above).
• Press Volume Up and Volume Down to scroll through your records.
[Delete All]
[Del*]
Select to delete all Caller ID records logged at your phone or in your group.
[View Ans]
[N/A]
Select to review Caller ID records for calls that rang your phone and were
answered (somewhere in the system).
• Press Volume Up and Volume Down to scroll through your records.
• Go to the review options (see above).
[Exit]
[Exit]
Select to exit.
• Alternately dial 9.

NEC DSX Specifications