NEC DSX Software Manual

Group Ring
192 ◆ Features DSX Software Manual
Adjusting Ring Group Timers
1. If yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.
2. If no, change 1601-01: Line No Answer Timer (page 669) as required.
1. If yes, leave 1601-02: DIL No Answer Timer (page 669) at it’s current setting.
2. If no, change 1601-02: DIL No Answer Timer (page 669) as required.
1. If yes, leave 1601-01: Line No Answer Timer (page 669) at its current setting.
2. If no, adjust 1601-01: Line No Answer Timer (page 669) as required.
Other Related Features
Features
Attendant Position (page 24)
System operators will not ring for Ring Group calls. Do not include the operator in a Ring Group.
Call Coverage Keys (page 40)
A keyset can have Call Coverage keys for Ring Group master numbers.
Call Forwarding (page 44)
Call Forwarding does not reroute Ring Group calls.
Call Waiting / Camp-On (page 58)
An extension user cannot Camp-On to a busy Ring Group. When all extensions in the Ring Group are
busy, the call continues to ring until an extension becomes free.
Caller ID (page 63)
An extension’s display will show Caller ID data for a line terminated to a Ring Group master number
as the call is ringing.
Direct Inward Line (page 109)
A DIL can terminate to a Ring Group master number. When a call comes in on the line, all phones in
the Ring Group ring simultaneously.
Directed Call Pickup (page 129)
Directed Call Pickup can intercept Ring Group calls.
Directory Dialing (page 131)
Intercom Directory dialing will show Ring Group names.
Extension Hunting (page 154)
Group Ring calls do not activate hunting.
Night Service / Night Ring (page 252)
The Night (System) key sets the day/night status of a DIL terminated to a Ring Group.
Transfer (page 358)
An extension user can Transfer a call to a Ring Group master number. If unanswered, the call will
recall the extension from which it was transferred.
IntraMail Features
Voice Mail Overflow (page 590)
An unanswered DIL to the Ring Group master number can be picked up by the Ring Group Mailbox.
1.
If a Ring Group DIL is unanswered, does the call divert to its overflow destination after the
proper interval?
2.
If a DIL is unanswered at the overflow destination, does the call divert to Key Ring after the
proper interval?
3.
If the DIL doesn’t have overflow enabled and is unanswered, does the call divert to Key Ring
after the proper interval?

NEC DSX Specifications