NEC DSX Software Manual

Group Ring
DSX Software Manual Features ◆ 193
Features
Operation
Placing and Transferring Ring Group Calls
Placing an Intercom Call to a Ring Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To make an Intercom call to a Ring Group:
1.
Lift handset and press INTERCOM.
2.
Dial the Ring Group number (e.g., 600).
3.
Wait for co-worker to answer.
• If all Ring Group members are busy, your call will continue to ring until a group member becomes free.
Transferring a Call to a Ring Group
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To Transfer your call to a Ring Group:
1.
Press INTERCOM.
2.
Dial the Ring Group number (e.g., 600).
3.
Do one of the following:
a.
To screen (announce) the Transfer:
Wait for a Ring Group member to answer then press TRANSFER.
b.
To have the call go through unscreened (unannounced):
Press TRANSFER.
• If your Transfer is unanswered, the call will return to you.
c.
To return to the call before a Ring Group member picks it up:
Press the flashing (green) line key.

NEC DSX Specifications