NEC DSX Software Manual

Charts
DSX Software Manual Introduction ◆ 7
Introduction
System Number Plan/Capacities (Page 1 of 2)
DSX40 DSX80/160
System Options
Classes of Service 1-15
(COS 1 normally reserved for attendants)
Conference 32 simultaneous users in Conference (total of all Conferences system-wide)
8 simultaneous Conferences maximum
8 parties maximum in any one Conference
Extension Hunting (UCD) Master
Numbers
8
Extension Hunting Groups 8 (1-8)
Group Call Pickup Groups 8 (1-8, 0 = unassigned)
Privacy Release Groups 16 (1-16, 0 = unassigned)
Speed Dial, Personal 20 bins at each extension (701-720)
See Speed Dial (page 315) for additional information on Speed Dial capacities.
Speed Dial, System 999
Tenant Groups 1
Timeslots Non-blocking
Toll Restriction Levels 7 (1-7, 0 = no restriction)
Voice Mail Master Numbers 1 (normally 700)
Lines
Direct Line Access Codes 101-108 101-164
Line Dial Up Codes #901-#908 #901-#964
Ring Groups 8 (1-8)
0 = no assignment
Ring Group master numbers are normally 600-607.
Line Group Access Codes 90-98
Line Groups 9 (0-8)
Line Ports 8 (1-8)
Lines 5-8 require the Expansion Board.
64 (1-64)
Extensions
Attendant (Operator) Access
Number
0 (single operator)
01-04 (multiple operators)
Attendants 4

NEC DSX Specifications