NEC DSX - Page 376

Tie Lines
346 ◆ Features DSX Software Manual
Operation
Call Waiting / Camp-On
1.
Access the tie line and call busy extension.
2.
Dial 2 but do not hang up.
• If you hang up, the system converts your Camp-On to a Callback.
3.
Speak to your co-worker when they answer their Camp-On ring.
Central Office Calls, Placing
1.
Access the tie line.
2.
Do one of the following.
a.
For Direct Line Access:
i.
Dial 1 followed by the line number (e.g., 101 for line 1).
b.
For Line Group Access:
i.
Dial the Line Group code (9 or 90-98).
3.
Dial the outside number.
Direct Line Access
1.
Access the tie line, then dial 1 plus the line number (e.g., 101 for line 1).
2.
Dial outside number.
Door Box
To place a call to the Door Box:
1.
Access the tie line.
2.
Dial the Door Box extension number.
Hold
To retrieve a line on System Hold at a remote co-worker’s extension:
1.
Access the tie line.
2.
Dial *4.
3.
Dial the number of the line that is on Hold in the remote system (e.g., 01 for line 1).