NEC DSX - Page 377

Tie Lines
DSX Software Manual Features ◆ 347
Features
Intercom
To place an Intercom call:
1.
Access the tie line.
2.
Dial the extension number.
• To call the remote system’s operator, dial 0.
• The call rings the destination extension.
Night Service / Night Ring
To answer a call ringing over the paging system:
1.
Access the tie line.
2.
Dial *0.
Speed Dial (System)
To dial a Speed Dial number in the remote system:
1.
Access the tie line.
2.
Dial # and the System Speed Dial bin number (e.g., 201-299).
3.
The stored number dials out through a line in the remote system.