NEC DSX Software Manual

Volume, Brightness, and Contrast Controls
390 ◆ Features DSX Software Manual
Operation
Adjusting your Telephone’s Volume
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To interactively adjust the volume while a feature is active:
1
While the feature is active, press Volume Up and Volume Down.
• Pressing Volume Up and Volume Down while idle adjusts the telephone’s display contrast.
To adjust the display contrast:
1.
While your telephone is idle, press Volume Up and Volume Down.
• You see a display similar to: Contrast ------ 4
• If you see BGM instead, your telephone is in the Background Music mode. Press HOLD and try again.
To set up the volume control presets:
1.
[Menu + Volume]
[Menu + MORE + Vol]
Select the volume control preset mode.
2.
Do one of the following.
a.
[Ring]
[Ring]
• Select to preset the ringing volume.
• When you see Ring ------, press Volume Up and Volume Down to adjust
the incoming ring volume (1-9).
b.
[Off-Hook Ring]
[Ofhk]
• Select to preset the off-hook ringing volume.
• When you see OffHk Ring ------, press Volume Up and Volume Down to
adjust the Off-Hook Ringing volume (1-9).
c.
[Page]
[Page]
• Select to preset the Page receive volume (1-9).
• When you see Page ------, press Volume Up and Volume Down to adjust
the incoming Page volume.
d.
[Exit]
[Exit]
Select to exit the Volume Control preset mode.

NEC DSX Specifications