NEC DSX - Page 421

Volume, Brightness, and Contrast Controls
DSX Software Manual Features ◆ 391
Features
To set up the display brightness, contrast control, and dial pad illummination presets:
1.
[Menu + Display]
[Menu + MORE (2 or 3 times) + Dsply]
Select the display preset mode.
2.
Do one of the following.
a.
[Contrast]
[Cont]
• Select the display contrast preset.
• When you see Contrast ------, press Volume Up and Volume Down to set
the contrast preset (0-8).
b.
[Brightness + Active]
[Brght + Actv]
• Select the active brightness preset.
• When you see Active ------, press Volume Up and Volume Down to set the
active brightness preset (0-8).
c.
[Brightness + Idle]
[Brght + Idle]
• Select the idle brightness preset.
• When you see Idle ------, press Volume Up and Volume Down to set the
idle brightness preset (0-8).
d.
[Dial Pad]
[DlPad]
• T select the dial pad illumination preset, do one of the following.
[On]
[On]
Turn dial pad illumination on.
[Off]
[Off]
Turn dial pad illumination off.
[Exit]
Select to exit the display brightness and contrast control presets.
3.
[Exit]
[Exit]
Select to exit the display brightness and contrast control presets.
Adjusting your Telephone’s Volume
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]