NEC DSX Software Manual

Directory Dialing
DSX Software Manual IntraMail Features ◆ 471
IntraMail
Features
Additional Options
1. In yes:
- In 4224-08: Fax Detection (page 899), enter Yes.
- This allows the Directory Dialing Mailbox to detect fax CNG tone.
- In 4224-09: Fax Transfer Extension (page 900), enter the extension to which the Directory Dialing
Mailbox should route the fax.
- When the Directory Dialing Mailbox detects fax CNG tone, it routes the call to this extension.
2. If no:
- In 4224-08: Fax Detection (page 899) enter No.
1. If yes, in 4224-07: Next Call Routing Mailbox (page 899) assign a Next Call Routing Mailbox (1-16) to
the Directory Dialing Mailbox.
2. If no, in 4224-07: Next Call Routing Mailbox (page 899) remove the assignment by pressing CLEAR.
- Once assigned, dialing # routes to the Next Call Routing Mailbox and plays its message. Dialing 0
follows the 0 action of the Next Call Routing Mailbox.
1. Make sure the active Answer Table uses the Call Routing Mailbox programmed as a Directory Dialing
Mailbox.
- See Answer Tables (page 420) for more.
1. Make sure you have an action in the active Dial Action Table that is a GOTO to the Directory Dialing
Mailbox.
- See Dial Action Table (page 465) for more.
Other Related Features
Features
None
IntraMail Features
Directory Dialing Mailbox (page 475)
A Directory Dialing Mailbox is the type of mailbox required to implement Directory Dialing.
System Administrator (page 576)
Only the System Administrator can record the Directory Dialing Message.
1. Should Directory Dialing Mailbox be able to detect and route incoming faxes?
2.
Should Directory Dialing Mailbox callers be able to dial 0 for other options or # to go to another
routing mailbox?
3. To have an outside call be directly answered by the Directory Dialing Mailbox:
4. To allow callers to access Directory Dialing from a Dial Action Table action:

NEC DSX Specifications