NEC DSX Software Manual

Call Timer
DSX Software Manual Features ◆ 57
Features
Stopping and Restarting the Call Timer for Your Call
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To stop the Call Timer:
1.
Do one of the following.
a.
[Timer]
[Time]
Press the Call Timer soft key.
b.
Press the Manual or Automatic Call Timer key.
2.
The Call Timer disappears from the display.
To restart the Call Timer:
• The timer will restart from 00:00.
1.
Do one of the following.
a.
[Timer]
[Time]
Press the Call Timer soft key.
b.
Press the Manual or Automatic Call Timer key.
Resetting the Call Timer
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To reset the Call Timer while it is running (i.e., timing your call):
1.
Press CLEAR.
• The Call Timer restarts from 00:00. It does not disappear from the display.
Reviewing a Call’s Duration
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To review the duration of your last timed call:
1.
Wait for the Manual or Automatic Call Timer key to go out.
2.
Press the Manual or Automatic Call Timer key.

NEC DSX Specifications