NEC ELECTRA ELITE IPK II - Floor Mounting the Basic KSU

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 19
___________________________________________________________________________________
___________________________________________________________________________________
3.8 Floor Mounting the Basic KSU
Only the B64-U( ) KSU with no expansion KSU can be floor mounted.
1. Use the four locally provided screws to attach the floor mount bracket to
the floor.
2. Slide the KSU over the four hooks protruding from the floor mount
bracket as shown in Figure 5-16 Floor Mounting the Basic KSU.
3. To secure the KSU to the floor mounting bracket, install the two screws
as indicated in Figure 5-17 Securing the KSU to the Floor Mounting
Bracket.
Figure 5-16 Floor Mounting the Basic KSU
Figure 5-17 Securing the KSU to the Floor Mounting Bracket