NEC ELECTRA ELITE IPK II - Connecting the IP Terminal to the System

___________________________________________________________________________________
8 - 36 Installing Electra Elite IPK Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
14.3 Connecting the IP Terminal to the System
Refer to Figure 8-48 Connecting the Terminal to the System, and connect a
10/100 Base-T/TX cable to each IP terminal and to the networking equipment.
Figure 8-47 ITH-4D-3 Power Sources
Figure 8-48 Connecting the Terminal to the System
AC Adapter Etherne
t