NEC ELECTRA ELITE IPK II - Using a Switch Box; Wall Mounting ITH-4 D-3 Multiline Terminals

___________________________________________________________________________________
8 - 40 Installing Electra Elite IPK Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
4. Refer to Figure 8-55 Installing Base Cover, Press down on the base
cover and move it toward the knob until it clicks in place.
14.6 Wall Mounting ITH-4D-3 Multiline Terminals
The ITH-4D-3 terminal can be installed on the wall either by using a switch box
or by direct connection.
14.6.1 Using a Switch Box
1. Remove the Base Cover, and hook it on a switch box as shown
in Figure 8-56 Attaching Base Cover to Switch Box.
Figure 8-55 Installing Base Cover
Figure 8-56 Attaching Base Cover to Switch Box