EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Installation

NEC ELECTRA ELITE IPK II
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
___________________________________________________________________________________
6 - 50 Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
5.9.2 Installation
Basic Port Package
A maximum of two DTI-U40 ETUs, configured as either DTI or PRT,
can be installed in any slot. The system is limited by 64 trunk and
system ports combined.
The maximum number of DTI-U40 ETUs depends on other trunk
cards installed. This ETU shares the CO/PBX lines in the system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
Expanded Port Package
A maximum of 11 DTI-U40 ETUs, configured as either DTI or PRT,
can be installed in any slot. The system is limited by 200 trunks.
The maximum number of DTI-U40 ETUs depends on other trunk
cards installed. This ETU shares the CO/PBX lines in the system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
The maximum number of DTI-U40 ETUs and PRT(1)-U( ) ETUs that
can be installed is 11 per system.

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals