NEC ELECTRA ELITE IPK II - External Equipment Interface; Music on Hold;Station Background Music; Music for Station BGM Using Analog CO Trunk ETU (COI, COIB, or COID); External Paging (Audio)

Electra Elite IPK II Document Revision 3
System Hardware Manual 3 - 35
___________________________________________________________________________________
___________________________________________________________________________________
5.9 External Equipment Interface
Input signal levels, impedance, contact ratings, and connector types are listed
for externally connected equipment.
5.9.1 Music on Hold/Station Background Music
J Auxiliary Input: 0.6V PPS Signal Level
J Input Impedance: 600 Ω
5.9.2 Music for Station BGM using Analog CO Trunk ETU (COI, COIB, or
COID)
J Auxiliary input: 0.6 V PPS Signal Level
J Input Impedance: 600 Ω
5.9.3 External Paging (Audio)
J Output Power: -10 dBm Signal Level
J Output Impedance: 600 Ω
J Relay Contact Rating: 500 mA, 24 Vdc
SLIB(4)-U10 ETU
13.0 oz
(370 g)
1.97”
(50 mm)
9.45”
(240 mm)
7.68”
(195 mm)
SLIE(4)-U10 ETU
10.7 oz
(303 g)
1.97”
(50 mm)
9.45”
(240 mm)
7.68”
(195 mm)
SLT(1)-U( ) ADP
9 oz.
(255 g)
1.8”
(45 mm)
2.8”
(70 mm)
4.8”
(120 mm)
TLI(2)-U( ) ETU
13.8 oz
(391 g)
1.97”
(50 mm)
9.45”
(240 mm)
7.68”
(195 mm)
VMS(2)/(4)/(8)-U( ) ETU
102.4 oz
2
(2903 g)
1.89”
(48 mm)
11.47”
(290 mm)
8.46”
(214 mm)
VMP(2)/(4)/(8)-U( ) ETU
102.4 oz
2
(2903 g)
1.89”
(48 mm)
11.47”
(290 mm)
8.46”
(214 mm)
1 Shipping weight includes the shipping carton.
2 Shipping weight includes the shipping carton and documentation.
3 Drive is shipped separately.
Table 3-12 Weights and Dimensions (Continued)
Unit
Shipping
Weight
1
Height Width Depth