NEC ELECTRA ELITE IPK II - Mounting the Wall Mount Unit on a Switch Box

___________________________________________________________________________________
8 - 46 Installing Electra Elite IPK Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
15.2 Mounting the Wall Mount Unit on a Switch Box
1. Locate the screw holes on the wall mount unit and hang the cover over
the screws on the switch box as illustrated in Figure 8-66 Mounting Wall
Mount Unit on the Switch Box.
 This method is not recommended because of varied strength of switch
boxes.
2. Hang the Multiline Terminal on the base cover.
Figure 8-66 Mounting Wall Mount Unit on the Switch Box
Figure 8-67 Wall Mounted Multiline Terminal