NEC ELECTRA ELITE IPK II - Wall Mounting the Expansion KSU

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 15
___________________________________________________________________________________
___________________________________________________________________________________
3.5 Wall Mounting the Expansion KSU
1. Fit the bottom of the Expansion Wall Mount Bracket to the top of the
Basic Wall Mount Bracket. Refer to Figure 5-11 Attaching the Expansion
Wall Mount Bracket to the Basic Wall Mount Bracket.
2. Hang the KSU on the two hooks protruding from the expansion wall
mount bracket as shown in Figure 5-9 Hanging the Basic KSU on the
Bracket.
3. To secure the KSU to the wall, install a locally provided screw in the hole
in the center of the wall mount bracket as shown in Figure 5-10 Securing
the Basic KSU to the Wall on page 5-14.
Figure 5-11 Attaching the Expansion Wall Mount Bracket
to the Basic Wall Mount Bracket