NEC ELECTRA ELITE IPK II - Installing Line Cards and Plastic Panels; Installing the Line Card and Plastic Panel

___________________________________________________________________________________
8 - 22 Installing Electra Elite IPK Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
SECTION 8INSTALLING LINE CARDS AND PLASTIC PANELS
8.1 Installing the Line Card and Plastic Panel
Line key designations are entered on the line card that is then placed on the
telephone to provide a quick reference of key designations. The line cards
can be changed as necessary. The plastic panel is placed on top of the line
card to hold it in place.
1. Place the line card over the keys on the Multiline Terminal.
 When replacing an existing plastic panel or line card refer to paragraph
8.2 Removing the Plastic Panel.
2. Place the plastic panel over the line card and push the corners of the
plastic panel until they click into place.
Figure 8-24 Installing Line Card and Plastic Panel on a Multiline Terminal
Figure 8-25 Installing Plastic Panel on a DTH/DTR Multiline Terminal
Multiline Terminal
Line Card
Multiline Termina
l
Plastic Panel