NEC ELECTRA ELITE IPK II - AD(A)-R;AD(A)-2 R Unit (Ancillary Device Adapter)

___________________________________________________________________________________
9 - 6 Installing Electra Elite IPK II Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.2 AD(A)-R/AD(A)-2R Unit (Ancillary Device Adapter)
This Ancillary Device Adapter, shown on Figure 9-6 AD(A)-R/AD(A)-2R Unit,
allows connection of a tape recorder to all Multiline Terminals except the
DTR-2DT-1. The AD(A)-2R is used with ITH-8D/16D-2 Multiline Terminals.
Figure 9-7 Connecting a Multiline Terminal to a Recording Device using an
AD(A)-R Unit (Example) illustrates how the AD(A)-R Unit is connected to the
ESI(8)-U( ) ETU and to the recording device.
When installing the AD(A)-R Unit, connect the cables to the AD(A)-R Unit, set
the dip switches, and then install the AD(A)-R Unit on the Multiline Terminal.
Figure 9-6 AD(A)-R/AD(A)-2R Unit
Figure 9-7 Connecting a Multiline Terminal to a Recording Device using
an AD(A)-R Unit (Example)
Line Cord
(2-line)
Mini-Plug Mini-Plug
Connection Cord
Recording
Device
ESI
ETU
Multiline Terminal + AD(A)-R Unit