NEC ELECTRA ELITE IPK II - Removing the Multiline Terminal from the Base Plate; Removing the Multiline Terminal from the WMU-U Unit

Electra Elite IPK II Document Revision 3
System Hardware Manual 11 - 39
___________________________________________________________________________________
___________________________________________________________________________________
3.9.4 Removing the Multiline Terminal from the Base Plate
To remove the Multiline Terminal from the base cover, lift the
Multiline Terminal to disengage top tabs, turn it slightly counter
clockwise to unlock lower tabs on base cover, and remove it.
3.9.5 Removing the Multiline Terminal from the WMU-U Unit
To remove the Multiline Terminal from the WMU-U Unit, lift the
Multiline Terminal to disengage top tabs and lower the terminal from
the WMU-U Unit.
Figure 11-51 Removing the Multiline Terminal from the Base Plate