NEC ELECTRA ELITE IPK II - Page 542

___________________________________________________________________________________
11 - 38 Installing Electra Elite Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
8. With the WMU-U Unit attached to the wall, hook the two bottom
tabs on the WMU-U Mount Unit in the tab slots on the Multiline
Terminal. Then push the two top tabs on the WMU-U Unit into
the tab slots on the Multiline Terminal. When the adapter has a
power supply, lead the AC adapter cord out through the
opening at the bottom of the Multiline Terminal. Refer to Figure
11-50 Attaching the Multiline Terminal to the WMU-U Unit.
Figure 11-50 Attaching the Multiline Terminal to the WMU-U
Unit
Wall
WMU-U Unit
Tab Slots
Multiline
Terminal
Adapter