NEC ELECTRA ELITE IPK II - Connectors; LED Indications

___________________________________________________________________________________
6 - 30 Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
5.3.4 LED Indications
Refer to Table 6-8 COI(8)-U( ) ETU LED Indications.
5.3.5 Connectors
The following connector is included:
J CN1 Connects to the backplane.
Table 6-8 COI(8)-U( ) ETU LED Indications
LED Description On Flashing Off
LIVE ETU status Operation
stopped
(Power On)
Normal
Operatio
n
No Power
LED 1 Line 1 status
COI(4)/COI(8)
Busy Not Used Idle
LED 2 Line 2 status
COI(4)/COI(8)
Busy Not Used Idle
LED 3 Line 3 status
COI(4)/COI(8)
Busy Not Used Idle
LED 4 Line 4 status
COI(4)/COI(8)
Busy Not Used Idle
LED 5 Line 5 status COI(8) Busy Not Used Idle
LED 6 Line 6 status COI(8) Busy Not Used Idle
LED 7 Line 7 status COI(8) Busy Not Used Idle
LED 8 Line 8 status COI(8) Busy Not Used Idle