NEC ELECTRA ELITE IPK II - Connections; Connectors; LED Indications

Electra Elite IPK II Document Revision 3
System Hardware Manual 6 - 59
___________________________________________________________________________________
___________________________________________________________________________________
5.10.4 LED Indications
Refer to Table 6-23 TLI(2)-U( ) ETU LED Indications.
5.10.5 Connectors
The following connector is included:
J CN1 Connects to the backplane.
5.10.6 Connections
Table 6-23 TLI(2)-U( ) ETU LED Indications
LED Description On Flashing Off
LED 1 ETU status
Operation
Stopped
(Power On)
Normal
Operation
No
Power
LED 2 Line 1 status Busy Not Used Idle
LED 3 Line 2 status Busy Not Used Idle
Figure 6-30 TLI(2)-U( ) ETU Connections
Side A
Telco
Side B
MDF
E
M
T
R
T
R
E
M
T
R
T
R
T
R
T
R