___________________________________________________________________________________
9 - 22 Installing Electra Elite IPK II Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.4.2 Connecting the CT(A)-R Unit to the PC
Connect RS-232C cable from the PC to the CT(A)-R Unit as shown
in Figure 9-22 Connecting the RS-232C Cable to the CT(A)-R Unit.
3.4.3 Installing the Optional Headset
Install the headset and anchor it in the cord slot on the Multiline
Terminal as shown in Figure 9-23 Attaching the Headset to the
Multiline Terminal.
Headsets that have open style receivers (i.e., Mirage, Duoset and
Duopro) can cause echo problems on ITH-8D/16D-2 telephones.
The echo suppression and receiver gain of the telephone determines
the severity of the echo when using any headset.
Due to the environment where the telephones or headsets are
located, ambient noise may affect performance. Please contact NEC
for the recommended headset to use with VoIP applications.
Figure 9-22 Connecting the RS-232C Cable to the CT(A)-R Unit
Figure 9-23 Attaching the Headset to the Multiline Terminal
To Next Page
Loading...
