EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Chapter 10; Dtp-2 Dt-1 Tel; General Information; Multiline Terminals

NEC ELECTRA ELITE IPK II
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Hardware Manual 10 - 1
___________________________________________________________________________________
___________________________________________________________________________________
Installing Electra Elite
Multiline Terminals
Chapter 10
SECTION 1GENERAL INFORMATION
The Electra Elite IPK II system provides several Electra Elite Multiline Terminals, an
Attendant Console, and several adapters that attach peripheral equipment to the
Multiline Terminals. The adapters can be used with
D
term
Series E Multiline Terminals
also. This chapter describes each terminal, console, and adapter and provides
applicable installation instructions.
SECTION 2MULTILINE TERMINALS
2.1 DTP-2DT-1 TEL
This digital nondisplay Multiline Terminal has two programmable line keys
(each with a 2-color LED), eight function keys, a built-in speakerphone,
headset connection, and a large LED to indicate incoming calls and
messages.
Basic Port Package
A maximum of 56 DTP-2DT-1 TELs can be installed. The combined total of all
Electra Elite Multiline Terminals that can be installed is
56.
Expanded Port Package
A maximum of 240 DTP-2DT-1 TELs can be installed. The combined total of
all Electra Elite Multiline Terminals that can be installed is
240.

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals