NEC ELECTRA ELITE IPK II - Attaching and Removing the Belt Clip

___________________________________________________________________________________
13 - 26 Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3. Plug the AC adapter in a standard 120 Vac wall outlet.
8.9 Attaching and Removing the Belt Clip
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip in the tab slots. Press firmly until it snaps into place. The
belt clip fits snugly on the handset.
2. To remove the clip, press the retaining clip in toward the belt clip blade
and slide the clip up at the same time.
Figure 13-24 Attaching the Belt Clip to the Handset
Figure 13-25 Removing the Belt Clip