NEC ELECTRA ELITE IPK II - LED Indications

Electra Elite IPK II Document Revision 3
System Hardware Manual 6 - 85
___________________________________________________________________________________
___________________________________________________________________________________
6.8.4 LED Indications
LED 1 (LIVE) indications are:
J Flashing Red Normal Operation
J Steady Red Operation Stopped (Power On).
J Off No Power
LED 2 (BUSY) indications are:
J Steady Red Some ports busy
J Off All ports idle
Table 6-27 SW2-2/SW2-3 Details
SW 2-2 SW 2-3 Function
ON ON
Factory Test
OFF
ON
Firmware Upgrade
ON
OFF Not Used
OFF OFF
Normal Operation
(Default)
Table 6-28 SLIB(4)-U10 ETU SW3 Switch Settings
SW 3-1 SW 3-2 SW 3-3 SW 3-4 Country Selection
ON ON ON ON
North America (Default)
ON OFF OFF ON
Multiple SLT Devices (One
Single Line Telephone and
one External Loud Ringer)
 Firmware Version 1.72 or higher is required for the Multiple SLT
Devices setting.