NEC ELECTRA ELITE IPK II - Paging Connections; Connecting the PC to the KSU

___________________________________________________________________________________
7 - 2 Installing Electra Elite IPK II KSU Common Optional Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
SECTION 4PAGING CONNECTIONS
When connecting External Paging, the PGD(2)-U10 ADP is the interface with Paging
In/Out, Background Music (External Speaker) Out and/or External Tone Ringer/Night
Chime Out.
SECTION 5CONNECTING A KSU TO A PERSONAL COMPUTER
To use the PC Programming, specialized software must be installed in the user PC
and the PC must be connected using a serial port to the KSU.
5.1 Connecting the PC to the KSU
Using a DB9 straight cable, connect the PC to one of the COM ports on the
side of the KSU. Refer to Figure 7-2 Connecting a PC to the KSU.
The functions and the communication port connections are:
Serial-port characteristics include:
Function Port
PC Programming/Station
Message Detail
Recording (SMDR)
COM 1
Characteristic Value
Baud Rate 38.4 K (maximum)
Parity None
Stop Bit 1 stop bit
Data Bit 8 bits
Port Type DCE