Electra Elite IPK II Document Revision 3
System Hardware Manual 9 - 29
___________________________________________________________________________________
___________________________________________________________________________________
3.7 IP-R Unit
The Elite IP-R Unit allows connection to an IAD(8)-U( ) ETU with a MEGACO
Station Package in the Electra Elite IPK II.
Installing the IP-R Unit in the plug-in socket located at the bottom of the
Terminal transforms a DTH Multiline Terminal into an IP station. The user can
also connect a PC to the LAN through an RJ-45 Ethernet jack on the IP-R Unit
that acts as a switching hub.
Any Terminal (8D/16D/32D-1) with an IP-R Unit installed, in conjunction with
the IAD(8)-U() ETU (MEGACO Station Package), enables IP Telephony
stations for the Electra Elite IPK II System. The IP stations can provide
connectivity with the Corporate Elite over the local LAN (Ethernet).
3.7.1 IP-R Unit Specifications
Refer to Table 9-4 IP-R Unit Specifications.
Table 9-4 IP-R Unit Specifications
Feature Specification
Interface 10/100 Base-T (IEEE 802.3), RJ-45
Protocol Voice (UDP, RTP, and RTCP)
Signal (TCP, H.225 and H.245)
Jitter Buffer Max 90 ms
Quality of Station (QOS) Network Managed switches supporting Type
of Service (TOS) field and VLAN support
Local Power 27 V 750 mA via AC Adapter Base
Applications TFTP (Client), DHCP Client, Megaco (H.248)
Standards UL1459, FCC Part 68
Voice Specifications G.711 (PCM Mu-law/A-law) G.729
Mountable D
term
D
term
8D, 16D, 32D-type telephone
To Next Page
Loading...
