NEC ELECTRA ELITE IPK II - CTU(S) Unit Connections

___________________________________________________________________________________
11 - 24 Installing Electra Elite Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
J Headset Operation
When user uses CTU and TAPI and sets data for Telephony Service
Provider (TSP), the headset button can be controlled by TSP.
J USB Interface
This adapter uses Full Speed (12Mbps) as defined in the USB
Specification.
3.6.1 CTU(S) Unit Connections
This unit is a Computer Telephony Application adapter to connect a
Universal Serial Bus to an ESI(8)-U( ) ETU and can be connected to
any DTU/DTP Multiline Terminal except DTP-2DT-1, DTP-16HC-1 or
Cordless terminals.
A required AC Adapter is provided with the unit.
The following connections are required:
J AC Adapter
J Multiline Terminal jack labeled LINE
J PC USB port
J ESI port to ESI(8)-U( ) ETU
Figure 11-29 CTU (S)-U Unit
To DTU or DTP Multiline Terminal
DC 24V (ADP)
USB Cable to PC
To ESI Port