NEC ELECTRA ELITE IPK II - Programming Options

Electra Elite IPK II Document Revision 3
System Hardware Manual 9 - 67
___________________________________________________________________________________
___________________________________________________________________________________
3.11.4 Programming Options
To enter Programming mode, press and hold REDIAL until a
diamond arrow is displayed on the LCD. Then press the applicable
key and follow the instruction in Table 9-14 Programming Options.
Table 9-14 Programming Options
Menu Option Key Programming
Ringer Melody 1
Press REDIAL. The current melody selection
flashes. Press 1~5 to change melody. Press
REDIAL to save the selection.
Dialing Mode 2
Press REDIAL. The current dialing selection
flashes. Press 1 for tone or 2 for pulse. Press
REDIAL to save the selection.
Flash Duration 3
Press REDIAL. The current duration flashes.
Press 1~5 to select duration as follows:
1 = 600 ms
2 = 300 ms
3 = 150 ms
4 = 100 ms
5 = 80 ms
Press REDIAL to save the selection.
Local Number
, 4
Press REDIAL. Enter the telephone number that
you want displayed on the LCD in standby mode.
Press REDIAL to save the number.
Conference
, 5
Press REDIAL. Enter the telephone number you
want the conference key to dial. Press REDIAL to
save the number.
Service
, 6
Press REDIAL. Enter the telephone number you
want the O key to dial. Press REDIAL to save the
number.
Country 7
Press REDIAL. Press number key for country as
follows:
1 US/Canada/China/Japan/Mexico/Singapore
2 Europe CTR 21
3 Australia
4S. Africa
5Brazil
6 New Zealand
7 South Korea
Press REDIAL to save the country setting.

Press CLEAR to return the previous menu. Press and hold to
exit programming without saving changes.
, Press and hold 1 to enter hyphen or , to enter a space in the number.
Press CLEAR before entering a new number.