NEC ELECTRA ELITE IPK II - Plastic Panel Removal

___________________________________________________________________________________
10 - 14 Installing Electra Elite Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
6.2 Plastic Panel Removal
Lift the right corner, raise the panel, and slide the bottom away from the
Multiline Terminal.
Figure 10-15 Installing Plastic Panel on a DTU/DTP Multiline Terminal
Figure 10-16 Removing the Plastic Panel from the DTU/DTP Multiline Terminal
Never pull on the bottom of the plastic panel to remove it;
the plastic panel could be damaged.