NEC ELECTRA ELITE IPK II - Wall Mounting the Telephone

___________________________________________________________________________________
12 - 6 Installing Single Line Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.1.1 Wall Mounting the Telephone
1. Remove the metal base from the telephone by removing the
two screws as illustrated in Figure 12-5 Removing the Metal
Base.
2. Lift the metal plate and note the direction of the tabs so that
they can be correctly reversed.
3. Flip the metal base around as illustrated in Figure 12-6
Reattaching the Metal Base. Insert the tabs into the
receptacles marked
(A) and reattach to the telephone using the
two screws that were previously removed.
 Because of manufacturing variations in wall-mount brackets,
installing the terminal wall mount with optional screws offers the
most reliable fit.
Figure 12-5 Removing the Metal Base
Note Position of