NEC ELECTRA ELITE IPK II - Switch Settings

Electra Elite IPK II Document Revision 3
System Hardware Manual 9 - 11
___________________________________________________________________________________
___________________________________________________________________________________
3.2.2 Switch Settings
The AD(A)-R Unit has two switch locations; SW1/SW2 and the DSW
switches. The location of the switches on the AD(A)-R Unit is
illustrated in Figure 9-13 AD(A)-R Switch Default Settings. The dip
switches (DSW) allow a technician to configure the unit for specific
settings.
Figure 9-12 AD(A)-R Unit Cable Access Port
Figure 9-13 AD(A)-R Switch Default Settings
Cable Access Port
Cable