NEC ELECTRA ELITE IPK II - External Tone Ringer;Night Chime Output; SMDR Output; PC Connection; ACD;MIS Connector

___________________________________________________________________________________
3 - 36 System Specifications
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
5.9.4 External Tone Ringer/Night Chime Output
J Output Power: -10 dBm
J Output Impedance:600 Ω
J Relay Contact Rating:500 mA, 24 Vdc
5.9.5 SMDR Output
J Female Connector (System Output):
Standard DB-9 (straight)
5.9.6 PC Connection
J Female Connector (System Input/Output):
Standard DB-9 (straight)
5.9.7 ACD/MIS Connector
J Female Connector (System Output):
Standard DB-9 (straight)
5.9.8 Relay Contact
J All Relay Contact Ratings: 500 mA, 24 Vdc
5.10 Audible and Visual Indications
The tables in this section provide the audible and visual indications used in the
Electra Elite IPK II systems.
5.10.1 Tone Patterns
Tones are used in the Electra Elite IPK II systems to inform the
station user of various system functions such as, dial tone, busy
tone, or ringback tone. Table 3-14 Tone Patterns lists the frequency
and the pattern for these tones.
5.10.2 LED Flash Patterns
The Electra Elite IPK II system has 2-color LEDs. Green is used
primarily for I-Use conditions and for outside calls. Red is used
primarily for Other Use conditions and internal calls. Refer to Table
3-14 Multiline Terminal LED Flash Patterns.