NEC ELECTRA ELITE IPK II - Wall Installation; Standard Wall Plate Mounting

___________________________________________________________________________________
13 - 20 Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
The AC adapter furnished with this telephone may be equipped with a
polarized line plug (one blade is wider than the other). This plug fits in the
power outlet only one way. Refer to Figure 13-14 Polarized Plug.
When you cannot plug the AC adapter in the outlet, you may need to replace
it.
8.6 Wall Installation
8.6.1 Standard Wall Plate Mounting
The base unit can be mounted on standard wall plate. To attach the
wall mount stand to the base unit:
1. Slide the wall mount stand in the notches at the top of the base
unit. Rotate the wall mount stand down and snap it into place.
Figure 13-14 Polarized Plug
Route the power cord where it cannot create a trip hazard, or
where it could become chafed and create a fire or other
electrical hazards.
Wide Blade
AC Adapter