EasyManua.ls Logo

NEC ELECTRA ELITE IPK II - Installation; Switch Settings

NEC ELECTRA ELITE IPK II
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electra Elite IPK II Document Revision 3
System Hardware Manual 6 - 29
___________________________________________________________________________________
___________________________________________________________________________________
5.3.2 Installation
Basic Port Package
A maximum of 14 COI(4)-U( ) ETUs or seven COI(8)-U( ) ETUs can
be installed in any interface slot. The system limitation is 64 trunk or
station ports combined.
The maximum number of COI(4)/(8)-U( ) ETUs depends on other
trunk cards installed. This ETU shares the total number of CO/PBX
lines in the system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
Expanded Port Package
A maximum of 23 COI(4)-U( ) ETUs or 23 COI(8)-U( ) ETUs can be
installed in any interface slot. The system limitation is 200 trunks.
The maximum number of COI(4)/(8)-U( ) ETUs depends on other
trunk cards installed. This ETU shares the total number of CO/PBX
lines in the system.
Calculating maximum capacity is based on the system having a
minimum of eight Electronic Station Interface (ESI) ports, four trunk
ports and a PKUII-U Unit installed.
5.3.3 Switch Settings
Refer to Table 6-7 COI(8)-U( ) ETU Default Switch Settings.
Table 6-7 COI(8)-U( ) ETU Default Switch Settings
Switch Setting Description
SW1~8 Set according to the
line type.
Default Setting: LP
Switches between Loop Start (LP)
or Ground Start (GS) Trunks on
Lines 1~8 of COI(8)-U10 ETU.
Reset N/A Resets the COI ETU

Table of Contents

Other manuals for NEC ELECTRA ELITE IPK II

Related product manuals