NEC ELECTRA ELITE IPK II - Connecting the Attendant Console to a Multiline Terminal

___________________________________________________________________________________
8 - 20 Installing Electra Elite IPK Multiline Terminals
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
SECTION 6CONNECTING THE ATTENDANT CONSOLE TO A MULTILINE TERMINAL
An Attendant DCR-60-1 Console can be attached to a Multiline Terminal using the
following procedure.
1. Place the Multiline Terminal and the Attendant Console face down.
2. Using the joining plate provided with the Attendant Console, attach the plate to
the Multiline Terminal and the Attendant Console.
3. Connect the line cord and the AC adapter to the indicated locations on the
bottom of the Attendant Console.
Figure 8-20 Connecting the DCR Console to a Multiline Terminal
Figure 8-21 Connecting the Line Cord and AC Adapter
when Installing a DCR Attendant Console
Line Cord Jack
AC Adapter Plug