NEC ELECTRA ELITE IPK II - Connecting Battery Expansion Cables to the Expansion KSU

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 25
___________________________________________________________________________________
___________________________________________________________________________________
3.10.2 Connecting Battery Expansion Cables to the Expansion KSU
1. Lead the Battery Expansion Cables (included with the
EXP-U( ) ETU) through the clamps and tie them to the KSU
with a tie wrap on the expansion KSU.
2. When using two expansion KSUs, connect the PSU of each
expansion KSU with the Battery expansion cables, lead the
cables through the clamps, and tie them with a tie wrap.
Figure 5-24 Connecting Battery Expansion
Cables to the Expansion KSU