NEC ELECTRA ELITE IPK II - Connecting the CT(U)-R Unit to the PC; Installing the Optional Headset; Installing the Driver on the PC

___________________________________________________________________________________
9 - 26 Installing Electra Elite IPK II Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
4. Attach the AC-2R/AC-3R to the CT(U)-R Unit. Refer to Figure
9-5 Connecting the AC Adapter to an Installed Adapter on page
9-5.
3.5.2 Connecting the CT(U)-R Unit to the PC
Connect USB cable from the PC to the CT(U)-R Unit as shown in
Figure 9-27 Connecting the USB Cable to the CT(U)-R Unit.
3.5.3 Installing the Optional Headset
Install the headset and anchor it in the cord slot on the Multiline
Terminal as shown in Figure 9-23 Attaching the Headset to the
Multiline Terminal on page 9-22.
3.5.4 Installing the Driver on the PC
Using the download from Web with the CT(U)-R Unit install the driver
on your PC. Refer to the CT(U)-R Unit installation instructions for
installing the driver
.
Figure 9-27 Connecting the USB Cable to the CT(U)-R Unit