NEC ELECTRA ELITE IPK II - Connections; Connectors

___________________________________________________________________________________
6 - 154 Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
8.4.5 Connectors
The following connectors are included:
J CN1 Connects to the backplane.
J CN2 Performs maintenance functions.
8.4.6 Connections
There are no physical connections to the MDF for the CCH(4)-U( )
ETU.
5 Link Status for
CCH1
Data Sent/
Received
Not Used Idle
6 Link Status for
CCH2
Data Sent/
Received
Not Used Idle
7 Link Status for
CCH3
Data Sent/
Received
Not Used Idle
8 Link status for
CCH4
Data Sent/
Received
Not Used Idle
9 CCH status Alarm Normal
Operation
Not Operating
10 LIVE Operation
Stopped
(Power Still
On)
Normal
Operation
No Power
Table 6-52 CCH(4)-U( ) ETU LED Indications (Continued)
LED Description On Flashing Off