NEC ELECTRA ELITE IPK II - Installation Procedures for Windows 98 or ME; Installation Procedures for Windows 2000 or XP

___________________________________________________________________________________
9 - 48 Installing Electra Elite IPK II Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3.9.5 Installation Procedures for Windows 98 or ME
1. Run the Setup.exe program file from the NEC installation CD
before connecting the telephone interface unit to your PC.
2. Connect the VSR USB interface connector to your PC using
the provided USB cable.
3. Connect your telephone to either VSR port.
4. Connect the other VSR port to the telephone system, and
recording is enabled.
3.9.6 Installation Procedures for Windows 2000 or XP
1. Using the provided USB cable, connect the VSR USB interface
to your PC.
2. Windows automatically detects the new hardware and displays
a Wizard dialog box.
3. Select Install from a list or specific location (Advanced), and
select next.
Figure 9-48 Wizard Welcome Screen