Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 21
___________________________________________________________________________________
___________________________________________________________________________________
3.9.2 Grounding Requirements
The KSUs must be properly grounded. The Electra Elite IPK II KSUs
are provided with a typical AC third-wire ground. When this ground is
questionable, an alternative ground must be provided.
1. Connect the grounding cable (green wire) to the ground
terminal on the right side of the Basic KSU. The locally
provided grounding cable AWG must be greater than #16.
Figure 5-19 Attaching the Frame Ground Plate
To Next Page
Loading...
