NEC ELECTRA ELITE IPK II - Securing Cables Using the Velcro Strap

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 11
___________________________________________________________________________________
___________________________________________________________________________________
2. To remove the front panel, slide it to the right and pull.
3.3 Securing Cables Using the Velcro Strap
Amphenol cables attached to the side of the KSU can be secured using the
provided velcro strap. When wall mounting, this should be done prior to
attaching the KSU to the wall mount bracket.
1. When one or two amphenol cables are attached to the KSU, the velcro
strap can be threaded around the cable and through the hooks to secure
the cables.
Figure 5-4 Removing the Front Panel of the KSU
Figure 5-5 Threading the Velcro Strap to Secure Amphenol Cables
Velcro
Cable
Hooks