NEC ELECTRA ELITE IPK II - Page 541

Electra Elite IPK II Document Revision 3
System Hardware Manual 11 - 37
___________________________________________________________________________________
___________________________________________________________________________________
5. Place the bundled line cord between the WMU-U Unit and the
wall. Lead the line cord out through the slits as shown in Figure
11-48 Leading the Line Cord out of the WMU-U Unit.
6. Attach the WMU-U Unit to the posts on the wall plate (locally
provided). Place locally provided screws in the nodes on the
WMU-U Unit and secure the WMU-U Unit to the wall.
7. Connect the line cord to the Multiline Terminal.
Figure 11-48 Leading the Line Cord out of the WMU-U Unit
Figure 11-49 Attaching the Wall Mount Unit to the Wall
Posts
Nodes
Nodes