NEC ELECTRA ELITE IPK II - Page 540

___________________________________________________________________________________
11 - 36 Installing Electra Elite Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3. Remove the tabs from the WMU-U Unit as shown in
Figure 11-47 Removing the Tabs from the WMU-U Unit. (The
Tabs that are removed depend on the Multiline Terminal type.)
4. Bundle the cord from the modular jack leaving about eight
inches. Use a tie wrap to secure the bundled cord.
Figure 11-46 Removing the Tabs from the Adapter
Figure 11-47 Removing the Tabs from the WMU-U Unit
Cut
Cut
Cut
Cut
Cut
DTU/DTP-32-1 TEL
DTP-32D-1/DTU-32D-2 TEL
DTU/DTP-8-1 TEL
DTP-8D-1/DTU-8D-2 TEL
DTU/DTP-16-1 TEL
DTP-16D-1/DTU-16D-2TEL
DCU-60-1 CONSOLE