NEC ELECTRA ELITE IPK II - Page 101

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 13
___________________________________________________________________________________
___________________________________________________________________________________
2. After the bracket is mounted to the wall, peel off the spacer backing.
Place and adhere the spacer to the position shown in Figure 5-8
Attaching the Wall Mount Bracket with Spacer.
 All wall and rack mounted KSUs must have the Spacer Bracket added to
the Wall Mount Bracket.
3. Hang the KSU on the two hooks protruding from the wall mount bracket
as shown in Figure 5-9 Hanging the Basic KSU on the Bracket.
Figure 5-8 Attaching the Wall Mount Bracket with Spacer
Figure 5-9 Hanging the Basic KSU on the Bracket
2
.
5
6
i
n
.
2.17 in.
Spacer