Electra Elite IPK II Document Revision 3
System Hardware Manual 7 - 11
___________________________________________________________________________________
___________________________________________________________________________________
2. The back of the PGD(2)-U10 ADP has two key-hole type openings.
Place the PGD(2)-U10 ADP over the two screws and slide it down or
over (depending on the positioning) to lock it in place.
Figure 7-10 Installing the Screws
Figure 7-11 Wall Mounting the PGD(2)-U10 ADP
4mm
3mm
100mm
100mm
Protruding
Screws
Protruding
Screws
To Next Page
Loading...
