NEC ELECTRA ELITE IPK II - Page 342

___________________________________________________________________________________
7 - 16 Installing Electra Elite IPK II KSU Common Optional Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
6.8 External Paging And Page Relays
6.8.1 External Page Relays
Two external dry contact relays are available when a
PGD(2)-U10
ADP is installed that can be used to activate ancillary devices (i.e.,
door unlock devices). The relays on the
PGD(2)-U10 ADP are
numbered 1~8. Each Door Box/external page circuit provides a dry
relay contact.
Figure 7-14 PGD(2)-U10 ADP Cable Connection
 Page amplification is not provided by the PGD(2)-U10 ADP and must be
accommodated by using an external page amplifier.
Relay 5
Relay 6
AC 117V
External Rela
y
External Page
Page Control
CN2 or CN3
PGDAD Module
CN1
CN2
CN3
To 8/16
ESIU PCB